how to replace basketball backboard插图

Best answer


Heatis the hardest but most effective method to patch a basketball backboard. Start with flaming the damaged base area by moving the heat gun over it. Stop every few seconds and repeat, or else it will burn. Keep checking until it starts melting. Then, blowout the fluid into the holes so that the patch is added to the damaged spot.

People also ask


  • How do you remove a backboard from a basketball?

  • Most backboards are also glued to the frame, so you may need to use a putty knife to pry off, scrape and remove all of the old backboard material. Useful Tip: Keep the old backboard or pieces of it to use as a template to mark the holes for the rim on the new backboard.

  • How do you replace a backboard rim?

  • Most backboards are also glued to the frame, so you may need to use a putty knife to pry off, scrape and remove all of the old backboard material. Useful Tip: Keep the old backboard or pieces of it to use as a template to mark the holes for the rim on the new backboard. Step 7: Drill holes to mount the rim.

  • Can I upgrade my portable basketball hoop with a backboard?

  • I have a portable hoop that was knocked over in a bad storm and the very thin acrylic backboard was shattered. It was very flimsy anyway and did not have very good banking action so this was my chance to upgrade my hoop by adding a quality homemade backboard at a very low cost.

  • How do you measure for a new backboard?

  • Measure what is left of your existing backboard or the frame where the backboard is attached. This will determine the size of your new backboard material. You want the new backboard material to be the same dimensions ( length and width ) of the original.